Terex CC 2800-1

Terex CC 2800-1 Crane Overview and Specifications

The TEREX CC 2800 – 1 is a crawler crane with a maximum lifting capacity of 660 tons. The maximum boom length is 452.8 feet and the maximum jib length is 118 feet.

The car body and crawler side frames are bending and torsion resistant, and made of high strength fine grain structural steel. The track shoes, idler, and drive sockets of the crawlers are made of heat treated high strength cast steel. There are 15 rollers with hardened rolling surfaces on each side of the crawlers and an automatic centralized lubrication system. The frame of the superstructure, also torsion resistant and made of high strength fine grain steel, is connected to the carrier frame by a triple-row roller bearing slew-ring.

The engine is a DaimlerChrysler OM 502 LA. This Tier III compliant diesel engine is rated at 530 horsepower. The pump distribution gearbox has five variable displacement axial piston pumps, a silencer with a spark arrestor, and gear pumps.

The tracks of the TEREX CC 2800 – 1 are powered by two hydraulic motors each through closed planetary gear reduction units running in oil baths. Both tracks are equipped with spring-applied hydraulically released holding brakes. The gear units were designed compactly to fit inside of the width of the crawler. The four hydraulic assembly jacking cylinders are found on the car body for easy assembly of the crawlers and fold to a 9.8 feet width.

If you are interested in learning more about the Terex CC 2800-1, please contact one of Bigge’s sales professionals at 1 (888) 897-2444.