Broderson IC-250

Carry Deck Crane Information

Broderson IC-250

Max. Cap 18 US Tons
Boom 61 ft

The Broderson IC-250 crane is a low profile carry deck that is great for industrial projects in constrained environments and easy transport. Made with heavy-duty chassis and accompanied with flexible steering, this crane is perfect for small spaces but can clear large overhead obstacles.

The maximum lift capacity is 36,000 lbs on outriggers, without the outriggers the max pick and carry capacity is 18,500 lbs, self-loading carry deck capacity when centered is 17,000 lbs. The crane comes with 4 outriggers, they are hydraulic powered and can be controlled individually. The outriggers also come with a sensor indicating whether the outriggers are touching the ground.

The main boom length is 50 ft/15.24 m. The max. tip height is 79.6 ft/24.26 m (with boom extension) and max horizontal reach 70.1 ft/21.36 m (with boom extension). The boom is a 4 sectional boom and can extend and retract sequentially with 360° continuous rotation capability.

The engine can be either EPA tier 2 or tier 4 and comes with a powershift transmission. With 4 speeds forward and reverse, the operator can power shift with minimal bumps and jolts for a smoother workflow. Equipped with a hydraulic-powered turret-mounted planetary gear system, it’s capable of low-speed power to lift heavy loads, and a high-speed setting for faster cycle times when lifting lighter loads. Aided by electronic sensors and a control box that automatically aligns the steering after a new mode is selected, the operator can quickly switch between rear-wheel steering, 4‑wheel, or crab steering, rear wheels steer in two-wheel drive mode.

Compact in size, the height for the IC-250 is 7.11 ft/2.41 m and the width is 7.10 ft/2.39 m. For safety features, it has a Rated Capacity Limiter that warns the operator of impending overload with audible and visual signals, and stopping boom functions in the event of overloads. Broderson added a rubber-mounted rear axle and suspension that eliminates sudden load swings inherent in pivot mounted axles; thus, axle oscillation lockouts are not required. 

For additional information about optional equipment/​features regarding the Broderson IC-250, please contact us for details. Our Bigge representatives are on standby for any assistance or questions.